Practical solutions to increase the space available
The Inkema swing sliding doors offer a wide range of configurations: they can be installed with or without lower guide, depending on their characteristics.
For small spaces, but with an intense vehicle traffic, the best option is the sliding door without lower guide: the weight is totally compatible with the upper track and it can be assembled with a motor.
For big openings, the best solution is the sliding door with a lower guide. Maximum functionality and durability.
Panels : The door is formed by one or two 52 mm thick leaves, with an internal perimetric frame of galvanized steel profile of 2 mm thick. The leaves are also covered by a galvanized steel sheet, and submitted to phosphate coating of 20 micron thick.
Guides : The upper guide is fixed on the ceiling on a galvanized steel tube. This guide remains hidden thanks to a lacquered sheet cover. In the case of having a lower track, the door’s double bearing steel wheels are mounted there.
Locking bar : This safety device avoids hand entrapment and allows its locking at the same time of the door in two points. The locking bars run on Teflon-coated tracks. They allow a soft, quiet and precise operating.
The upper guide of the door remains hidden thanks to a lacquered plate cover.
The space between the leave and the fixed points is 50 mm to avoid entrapments. For manual, motorized or doors ready to be motorized.
Optional incorporation of window with natural rubber profiles EDPM in the pass-doors or in the leaves of the sliding door.
Pass-door coupled in one of the leaves of the sliding door with lower frame.
The polyurethane foam injection inside the panel guarantees perfect insulation. The density of the injected and expanded polyurethane is not lower than 43/45 Kg/m3.
Class 3 wind resistance certification. The door can withstand winds up to 120km per hour.
Comments